- High Performance Wall Paint
- One Coat Coverage
- Low Odour Waterbased Enamel
- Ultra Low VOC
- Paint and Primer in One
HIGH PERFORMANCE WALL PAINT
Cascadia High Performance Satin is an Ultra Low VOC premium finish for interior walls, including drywall, plaster, masonry, and primed wood. Formulated for one-coat coverage, it offers excellent coverage while minimizing surface imperfections with its rich, low sheen. This paint delivers smooth application with superior flow and leveling, along with a durable, washable finish, making it ideal for interior walls where long-lasting performance is key.
RECOMMENDED USES:
For use on new or previously painted interior residential walls for spaces such as:
- Bedrooms
- Living rooms
- Dens
- Home offices
- Entrance ways
- Hallways
PRODUCT DETAILS
Costco Item #1806327
Colour "Designer White"
Costco’s Designer White matches Rodda Paint and Cloverdale Paint popular “Lace” EX285.
Interior Wall Paint
Satin Finish
BEFORE & AFTER
Living Room
Bedroom
GENERAL PROPERTIES & INTENDED USES
1. Considerations Before Use
Environmental Conditions
Apply only at temperatures above 10°C (42°F) and when relative humidity is below 85%.
Spread Rate / Coverage
Coverage is approximately 500-660 ft² (12.2-16.1 m²/L) per 7.57L. (2.0 gallons) For improved results, apply two full coats for maximum hide and durability, especially on new surfaces.
Thinning
Not typically recommended.
Dry Times
Dries to the touch in 30 minutes; recoat in 4 hours. Cooler temperatures, high humidity, or thick applications will extend drying time.
2. Surface Preparation
Clean & Prepare:
Ensure the surface is clean, dry, and free of mildew, loose or scaling paint, and other contaminants. Sand glossy surfaces with 180-220 grit sandpaper eliminating gloss and sheen. Fill cracks, holes, and voids with a suitable filler and spot prime repaired areas to prevent flashing. Caulk as necessary. For substrates prone to stain bleed, apply a stain-blocking primer. Unpainted wood and metal should be primed with the appropriate primer.
Repair:
Scrape, or brush to remove scaling paint and loose material. Repair cracks, holes, voids and other irregularities using an appropriate filler. Spot prime with this product to avoid ‘flashing’. Caulk as needed.
Prime:
Paint and Primer in one. For improved performance a primer will improve adhesion, coverage, and increases the durability. Contact Rodda Paint for best recommendations.
3. Container Opening Instructions
Procedure – 4-Tab EZ Tear Skirt Covers
*NOTE* The EZ-style covers are designed to be removed by hand. Using mechanical methods can damage the cover.
BREAK TEAR TAB
PULL TO REMOVE TEAR STRIP
LIFT COVER TABS OUT AND UPWARD TO DISENGAGE FROM PAIL
Step By Step:
• Locate the tear-tab or ring-pull feature on the tear-away strip.
• Pry outward with your index finger to break the thin tether at the end of the tear-away strip.
• For ring-pull lids: Insert a finger (preferably an index finger) into the ring feature at the end of the tear-away strip. Pulling at a 90-degree plane to the pail, pull the strip away from the cover. Continue pulling the strip until it has completely separated from the cover. Discard the strip in an appropriate receptacle.
• For tear-tab lids: Grasp the tab at the end of the tear-away strip between thumb and forefinger. Pulling at a 90-degree plane to the pail, pull the strip away from the cover. Continue pulling the strip until it has completely separated from the cover. Discard the strip in an appropriate receptacle.
• Using your hands or an appropriate cover removal tool, lift each of the four (4) exposed cover segments around the cover outward & upward to disengage the cover from the pail.
• *NOTE* Aggressive removal techniques can create plastic hairs and shavings that can contaminate the packaged product.
4. Application Instructions
Tools & Techniques
Stir
Stir thoroughly before and during use to a uniform consistency. For multiple containers, mix paint together for colour consistency.
Apply by Brush
Use a nylon/synthetic brush, roller, pad or sprayer. Back roll with spray application. Use appropriate applicator for the specific job.
Applying by Roller
Use a quality 10mm nap roller cover and apply paint in a random W shaped pattern across wall surface to eliminate roller lap marks. Lightly roll over any lap marks.
5. Cleanup
Clean tools and equipment with warm, soapy water. Contact your local municipality for disposal instructions.
SAFETY
Do not take internally.
Close container after each use. Keep from freezing.
MAY IRRITATE EYES.
Do not get in eyes. Keep out of reach of children.
FIRST AID TREATMENT
If in eyes, rinse well with water for 20 minutes.
FREQUENTLY ASKED QUESTIONS FOR CASCADIA WALL PAINT
How many coats of paint do I need?
While Rodda Cascadia offers exceptional hide and one-coat coverage, applying two coats ensures a more uniform finish and enhanced durability.
Do I need a primer before painting?
A primer is recommended for new drywall, drastic colour changes, or surfaces with stains and repairs. Cascadia is self-priming on previously painted surfaces.
The Rodda Cascadia® product combines paint and primer in one for most surfaces, allowing for enhanced adhesion and coverage.
However, some surfaces may still require a primer coat for optimal results. Heavily stained areas, high-contrast colours, or bare substrates, additional primer or multiple coats may be required. Always refer to the Technical Data Sheet (TDS) for guidance on when a primer is recommended for specific applications.
How long does Cascadia Interior Wall Paint take to dry?
Cascadia will dry to the touch in 30 minutes and can be recoated after 4 hours.
How do I calculate how much paint I need?
A 2-gallon container covers approximately 500 – 660 ft2 (12.2 – 16.1 m2 /L) per 7.57L (2.0 gallon) when applied at the recommended thickness. Additional coats may be required for drastic colour changes, textured or repaired surfaces.
Is this paint washable?
Yes, use a soft sponge or cloth with mild soap for cleaning. Avoid heavy scrubbing, as it may damage the finish.
Can I paint over dark colours without a primer?
Yes, but using a primer will reduce the number of coats needed for better coverage and a more even finish.
How do I prepare walls for painting?
- Clean the walls with mild soap and water.
- Patch holes and cracks with spackle.
- Sand rough areas and remove dust.
- Spot prime all repaired areas.
Can this paint be used in bathrooms and kitchens?
What’s the best way to fix touch-up spots on painted walls?
Save a portion of the actual Cascadia Paint you applied for touch-ups. Use the same application method (brush vs. roller) as before. Feather the edges to blend seamlessly for a smooth finish.
How should I store leftover paint?
Seal the can tightly and store it in a cool, dry place.
RODDA PAINT CASCADIA® ONE-COAT HIDE & PAINT + PRIMER IN ONE WARRANTY
Guaranteed One-Coat Hide: The one-coat hide and paint & primer in one warranty applies to Cascadia Designer White Interior Wall Paint, please refer to TDS for warranty details.
© Copyright 2025. Cascadia High Performance.